UV Decal Uses and Instructions

UV DTF transfers can be used on many surfaces, including hard materials like glass, wood, metal, and plastic, and are easier to apply than other printing methods. Once correctly applied they will last and are waterproof.

How to Apply

  • Prepare Surface

    Clean the product you are applying the transfer to thoroughly. We recommend Dawn Dish Soap and water -- rinse and dry well. If the surface has been treated with Rain-x the decals may have a hard time adhering.

  • Peel Transfer

    Use a squeegee or plastic card to firmly press the stickers from the back. This will ensure it is firmly adhered to the carrier sheet. Peel the transfer off of the backing, ensuring all pieces lift off evenly

  • Apply

    Once the transfer is applied, remove bubbles or wrinkles with firm pressure using a squeegee or plastic card.

    After you smoothed the transfer out, apply pressure using your fingers to adhere evenly.

    Finally, peel off the clear layer on the front of your design diagonally.

    Note: If the transfer pulls up with the clear layer, push it back down and firmly press it back into place before trying to remove the clear layer.

Custom Jackets, Decals and Apparel

Connect with Us